We were able to spend some time working on the high tunnel on Sunday. First thing we did was to set up the transit so we could shoot grade and find out what areas we needed to bring in more soil to bring it up to a level grade. I knew we did not have a level site yet, but I didn't know we had a 25" drop from the highest point (NE corner) to the lowest point (SW corner), wow, a lot more than I figured. So I spent most of the day Sunday on the tractor cutting the NE corner down a little and bringing up the rest of it. Now we have a 6" drop across the 100' of the diagonal on the 96'x30' high tunnel. We will pound the ground posts in so they are all the same height and that will keep our 2x6 baseboard level, then we can fill in inside the tunnel to bring the ground level up to grade.
We ended the day by squaring the perimeter and setting the ground posts at the four corners and then we started setting the ground posts along the East side, we have a total of 8 of the 50 posts in the ground, they look pretty small in the picture. I am going to be busy with work for the rest of this week, but hopefully we can get back out next Saturday and set the remaining 42 ground posts.
Monday, April 29, 2013
Sunday, April 21, 2013
Tuesday, April 16, 2013
Tuesday, April 9, 2013
Wednesday, March 27, 2013
We ordered the high tunnel from FarmTek but unfortunately our flatbed trailer is too small for the shipment, so we have to pay to get it shipped out here. I'm not sure of the exact day but I am guessing it should be here in about 4 weeks.
Once the ground dries out a little bit more then I can get back out there with the tractor and finish moving the soil around and level and smooth out the site.
Once the ground dries out a little bit more then I can get back out there with the tractor and finish moving the soil around and level and smooth out the site.
Friday, March 22, 2013
Not very much to report yet, we should be selecting our high tunnel within a week and getting it ordered. It looks like it will be about a three week wait to get it manufactured. I think I will try to save some shipping costs and take the flatbed trailer and go pick it up myself. Shipping will cost about $2000 and I think I can do it for just about $1000 and three or four days of my time to go to Iowa and back.
Here is today's picture, I still have some ground leveling to do and make sure it is the right size. I think I spread the soil for a 32'x92' footprint but it looks like we will be ordering a 30'x96' size instead.
Here is today's picture, I still have some ground leveling to do and make sure it is the right size. I think I spread the soil for a 32'x92' footprint but it looks like we will be ordering a 30'x96' size instead.
Subscribe to:
Posts (Atom)